Wet Sounds REV 6X9-SM-B REV Series 6"x9" 150W RMS (300W Peak Power Handling) 4 Ohms, Marine Speakers HLCD with Enclosure & Grill (Black)
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 6"x9" REV Series Marine Speakers HLCD with Enclosure & Grill
- • (2) Enclosed surface-mount marine speakers (attached 15" speaker wire)
- • (2) Brackets
- • (4) M5 x 50mm screws
- • (4) M5 x 70mm screws
- • Owner's Manual
Why Choose Wet Sounds REV 6X9-SM-B Marine Speakers?
Surface-Mount Power with Full-Range Clarity
The REV 6X9-SM features a marine-grade, roto-molded housing made of UV-resistant, corrosion-free polyethylene, providing durable, long-lasting performance on boats, ATVs, golf carts, and other off-road vehicles. Powered by proprietary REV TEC technology, it delivers full-range sound with consistent volume and clarity both on- and off-axis, while the Pro-Axial driver design combines a 6x9" EFG cone woofer with a polyurethane surround and coaxial Horn-Loaded Compression Driver (HLCD) for high-output, immersive audio.
Durable Woofer, Efficient Highs
The REV 6X9-SM features a rugged EFG epoxy-fiberglass woofer cone that resists UV and moisture damage, ensuring long-lasting reliability in marine and off-road environments. Its HLCD horn-loaded compression driver provides wide horizontal dispersion, efficient high-frequency output, and minimal off-axis sound degradation for clear, powerful audio with less amplifier power.
Rugged, Easy-to-Install Surface Speakers
The REV 6X9-SM features a roto-molded enclosure designed to minimize vibration and maximize durability, complete with a protective silver grille over the Pro-Axial driver. Surface-mount brackets and screws allow for secure installation on flat surfaces, perfect for under-gunnel setups with a minimum width of 7", while the 15" attached speaker wire ensures quick, plug-and-play connectivity.
Frequently Asked Questions (FAQ)
- • Why is there no sound after installation?
Check speaker wiring, amplifier output, source settings, and connections. Confirm positive and negative terminals are connected correctly and the amplifier receives adequate power.
- • Why does the sound become distorted at higher volume?
Check amplifier gain, source volume, and equalizer settings. Excessive gain can cause clipping. Lower the gain and gradually increase volume for cleaner playback.
- • Why is the bass weaker than expected?
Check speaker polarity, amplifier settings, and crossover configuration. Reversed polarity can cause phase cancellation and reduce bass response.
- • Why does one speaker sound quieter than the other?
Check amplifier channels, speaker wiring, balance settings, and connections. A loose terminal or damaged wire can reduce output from one speaker.
- • Why does the speaker rattle during bass-heavy music?
Check mounting hardware, grille, and mounting surface for looseness. Tighten hardware securely and ensure the speaker is mounted firmly.
- • Why does the sound become harsh at high volume?
Harsh audio can result from excessive gain, clipping, or equalizer settings. Reduce amplifier gain and treble levels, then gradually increase volume.
- • What amplifier should I use with these speakers?
Use an amplifier matching the speakers' impedance and recommended RMS power. Avoid exceeding their continuous rating and verify amplifier output before installation.
- • Why does the sound change when I move the speakers?
Speaker positioning affects sound dispersion and bass response. Mount speakers securely and adjust their orientation toward the listening area for consistent coverage.
- • Can these speakers handle wet and marine conditions?
Yes. They are designed for marine environments, but proper installation and maintenance remain important. Keep connections secure and rinse saltwater residue after use.
- • Why does the speaker stop working after getting wet?
Inspect the wiring, connectors, and amplifier for moisture or corrosion. Allow components to dry completely, then check connections before powering the system again.
- Diameter : 6x9 Inch
- Sensitivity : 90 dB
- Impedance : 4 Ohm
- Frequency Response : 20-20000 Hz
- RMS Power Range : 150 Watts
- Peak Power Handling : 300 Watts
- Color : Black
- RMS Power Handling : 150 Watts
Features:
- Marine-Grade Surface-Mount Design: Enclosed, durable Roto-Molded housing with UV-resistant, corrosion-free polyethylene for long-lasting performance on boats, ATVs, golf carts, and other off-road vehicles.
- REV TEC Technology: Proprietary Wet Sounds design delivers remarkable full-range sound quality both on-axis and off-axis at long distances, ensuring consistent volume and clarity throughout your vessel.
- Pro-Axial Driver Design: Each speaker features a 6x9" EFG (Epoxy-Fiberglass) cone woofer with polyurethane surround and a coaxially mounted Horn-Loaded Compression Driver (HLCD) for high-output, full-range audio.
- EFG Woofer Cone: Epoxy-Fiberglass composite cone resists UV and moisture damage, providing superior longevity and reliability.
- HLCD Tweeter: Horn-loaded compression driver ensures wide horizontal sound dispersion with minimal off-axis degradation, delivering efficient high-frequency output using less power.
- Roto-Molded Enclosure: Designed for minimal vibration and maximum durability. Includes a protective silver plastic grille over the Pro-Axial driver.
- Surface Mounting: Comes with brackets and screws for flat-surface installation. Ideal for under-gunnel applications with a minimum width of 7".
- Plug-and-Play Wiring: Each speaker has a 15" attached speaker wire for easy connection.
Specifications:
- Speaker Size: 6" x 9"
- Design: 2-way coaxial
- Tweeter Design: Horn-Loaded Compression Driver (HLCD)
- Tweeter Composition: Titanium
- Woofer Composition: EFG (Epoxy-Fiberglass)
- Woofer Surround: Polyurethane
- Frequency Response: 20Hz – 20kHz
- Sensitivity: 90 dB at 1W/1m
- Max RMS Power Handling: 150W
- Peak Power Handling: 300W
- Impedance: 4Ω
- Surface-Mount Dimensions: 15.75"W x 8"H x 7.0625"D (mounting brackets add 1.5" to height)
- Weight: 10.6 lbs per speaker
- UPC: 814820023121
- Weight: 10
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
